UW Technics Canon EOS-R Mini TTL-Converter for NAUTICAM NA-R housing
UW Technics Canon EOSR Mini TTL-Converter for NAUTICAM NA-R housing (11028)
UW Tecnics's Canon EOS-R TTL-Converter for the Nauticam NA-R housing combined circuitry allows for both optical and electrical (with optional bulkhead) flash triggering. Both optical and electrical TTL can be used seperately or simultaneously so that up to 4 strobes can be fired at the same time!
With easy installation, convert from manual to TTL strobe firing within minutes.
Easy In-Camera Control
UW Techinics TTL circuit is fully controllable via camera menu, and includes a special feature for M mode that adjusts flash intensity. Built-in firmware allows the photographer to use 3 variants of M mode, including both classic method and advanced methods. Advanced control allows the user to adjust underwater strobe light intensity manually via camera scale (approximately 1/64 to 1/1). In this case, the photographer does not need to operate the dial switches on the strobe body, and can just keep their hands on the housing, switch M mode and set the flash intensity via the camera controls.
Strobe type can be easily set by onboard miniaturу 10-position rotary switch.
- Inon Z-330 / Z-240 / D-2000 / S-2000
- Sea&Sea YS-D1 / YS-D2 (made-in-China) / YS-250
- Ikelite DS160 / DS160
- Subtronic Pro-270 / Pro-160
Long Battery Life
Battery life is 5 years in continuous working mode. Products have micro current consumption from a pair of CR2032 batteries and automatic On/Off switch. User need not be concerned about the battery life of the device during a dive trip.
See User Manual for more information
Specifications of TTL Converter:
- Compatible photo cameras: Canon EOS-R
- Compatible underwater housing: Nauticam
- Compatible strobes: Inon Z 330, Z 240, S 2000;
Sea&Sea YS-250, YS-D1,YS-D2;
Ikelite DS161, DS160;
Subtronic Pro 270, Pro 160.
- TTL outputs onboard: 2 optical + 2 electric
- (+/- Ev) “Flash Exposure compensation” adjustment: yes
- “TTL / M” mode switching: yes
- Manual Adjustment of strobe intensity (by camera controls in “M” mode): approximately 1/64…..Full
- 1-st / 2-nd curtain mode: yes
- “Flash Off” mode: yes
- Continuous (serial) shooting mode: yes
- Switching power “On/Off”: automatic by camera command
- Battery: CR2032 (2 pcs.)
- Current consumption (in standby mode): 0.1 mkA
- Compatible Fiber-optic cable type: Nauticam #26216, #26217
- Compatible Electric cable: Sea&Sea, Ikelite
- Compatible Dual Electric cable: Sea&Sea, Ikelite
- Electric Bulkhead type (optional accessory): Nikonos-V, Ikelite, S-6
No posts found