Nauticam NA-S1R Underwater Housing for Panasonic Lumix S1 and S1R Cameras
Panasonic's full-frame mirrorless cameras the LUMIX S1 and S1 R cameras are physically identical, allowing them to share the same housing model, but couldn't be more different when it comes down to specifications. The S1's 24MP CMOS sensor may appeal to the videographer while the S1R's 47MP CMOS sensor is clearly aimed at the photographer. While both can capture stills and 4K video, each one has its strong suit.
While the two cameras may have different strengths, the NA-S1R is designed and built to give both video and still shooters dedicated access to all the controls and features exactly where they need them.
Nauticam engineers are obsessed with usability and the Mission Control philosophy means placing essential controls where they are needed, unrestricted by where they are located on the camera body. Placing the controls as close to the handles as possible and within easy and natural reach, the user can focus on composition and timing their shot while adjusting exposure or focus without taking their eye off the EVF or LCD.
The NA-S1R has a double thumb lever on the rear left side of the housing that accesses DISP and Playback while a double thumb lever on the left front activates the customizable Fn1 and Fn2 buttons. A rear double thumb elver on the right side is for AF-On and REC.
A lever on the right read of the NA-S1R allows for focus mode switching between C/S/MF and a multi-directional pad gives the ability to navigate the menu or move the focus point.
Sigma EF-lens Support
Sigma's MC-21 EF to L adapter will allows for the use of Sigma EF-mount lenses to be used with the S1 and S1R cameras. The NA-S1R is designed to not only accommodate the adapter but to allow for the use of the existing focus and zoom gears for Canon EF-mount Sigma lenses for the N120 Canon System along with the existing Canon N120 extension ring and port combinations for those lenses.
Optical flash triggering with automatic exposure is supported by the Panasonic DMW-FL70 (sold separately). For rapid-fire manual flash triggering, the NA-S1R is compatible with the Mini Flash Trigger (26309) which uses small LED units to trigger external flashes via Nauticam Universal Fiber Optic Cables (26216).
A TTL Flash On/Off lever on the top of the housing allows for enabling or disabling the DMW-FL70 flash in water.
HDMI 2.0 Output
To take full advantage of the S1 video capabilities, the NA-S1R features the large-bore M28 bulkhead for HDMI 2.0 connections such as those on the Atomos Ninja V when used in conjunction with the Nauticam Atomos Ninja V Housing (HDMI 2.0) for Atomos Ninja V 5" 4K 60p 4:2:2 10-bit Recorder/Monitor/Player (17922).
Vacuum Check and Leak Detection System
The Nauticam vacuum check and leak detection system is shipped with NA-S1R as standard equipment (both electronics and valve). This monitoring system provides constant updates on the water tight and safe-to-dive status of the housing.
- 32201 Nauticam 180˚ viewfinder
- 32203 Nauticam 45˚ viewfinder
- 26309 Mini Flash Trigger for NA-GH5/G9 Housing
- 28130 Hand Strap for 28113 (For NA-1DXII/D500/D5/80D/A9)
Recommended 4K Recorder/Monitor:
- 17922 Nauticam Atomos Ninja V housing (HDMI 2.0) for Atomos Ninja V 5” 4Kp60 4:4:2 10-bit Recorder/Monitor/Player
- 25078 HDMI 2.0 Cable M28A1R225-M28A1R170 for use with 17922 Ninja V Housing
Contrustion Material of Housing
- Hard anodized aluminum alloy, marine grade stainless steel hardware
Sync cord compatibility of housing: optical/electrical/both
Optional view finders for housing
- 180 ̊ straight viewfinder (32201)
- 45 ̊ viewfinder (32203)
- Dimensions: 363mm(W) x 215mm (H) x 153mm (D)
- Weight: 3.5 kg (in air)
- Depth Rating: 100m
What's In The Box:
- NA-S1R Housing
- Vacuum valve, monitoring electronics, and valve removal tool
- 90134 Housing O-ring, lubricant and removal tool
- CR2032 Battery (for vacuum system)
- Padded Travel Case
- Allen Wrench Set
No posts found