Nauticam Canon EOS R6 Underwater Housing

$4,690.00
+

The Nauticam NA-R6 Underwater Housing for the Canon EOS R6 Camera

The NA-R6 underwater housing follows suit with Nauticam's drive for innovation.

 

Lifetime Support!
Free US Shipping over $200!

The Nauticam NA-R6 Underwater Housing for the Canon EOS R6 Camera

The NA-R6 underwater housing follows suit with Nauticam's drive for innovation. To support both the legacy and native lenses, Nauticam has integrated the NA-R6 into the N120 port system. Canon's EF to RF mount adapters can be affixed to the camera before insertion into the housing. When using the EOS R6 inside the housing with the adapter and a supported EF lens, the port and extension ring arrangement will be identical to the same setup on a Nauticam Canon N120 DSLR. Two lens release buttons, one for RF and one for EF lenses used with the optional Canon adapter, are located on the front of the housing to make lens removal through the port opening simple.

Mission Control

Nauticam engineers are obsessed with getting the underwater image maker unfettered access to all the necessary controls, with as many within easy reach of the ergonomic rubberized handles. This Mission Control philosophy extends to the NA-R6 where a dual thumb lever and dual sub-lever are placed by the right handle. The upper thumb lever activates the "AF-On" and the lower the "Q" buttons while the sub-lever corresponds to the "M-Fn" and "Record" buttons. Near the left handle is a thumb lever for "Playback" as well as a dedicated switch to change from using LCD to the EVF.

Large knurled and rubberized control dials access the camera's "main" and "sub" command dials. The two-stage trigger allows for smooth focus and firing activation. Additional buttons for "Menu", "Focus Point Selection" and others are also easily reached from the handles.

An additional control wheel is located on the left side of the housing and will interface with the control ring on the supported EF to EOS R Mount Adapter with Control Ring using the optional gear (PN 19561).

Flash Triggering

Flash triggering is achieved via one of two optional Flash Triggers, a manual LED trigger (PN 26301) or a TTL Flash Trigger (PN 26321) that use the built-in fiber optic bulkheads with optional fiber-optic cables to trigger supported strobes.

Integrated Vacuum Check and Leak Detection System

The Nauticam vacuum check and leak detection electronics are shipped with the NA-R6 as standard equipment. Combined with an accessory vacuum valve (25625) this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing.

Housing Features
Depth Rating:
100m / 328ft
Construction Material :
Aluminum Alloy
Includes Moisture Alarm System:
Yes
Includes Vacuum Seal System:
Electronics pre-installed (requires vacuum valve)
Sync Cord Compatibility :
Optical/Electrical
TTL Converter Installed:
No (optional)
Interchangable Port System:
Yes
Compatible Port System:
N120
Cold Shoe Mount :
No
Includes Tray and/or Handles:
Yes
Access to All Camera Controls:
Yes
Dimensions:
357mm x 200mm x 161mm (W x H x D)
Weight- Land/Water:
3.5kg (123.5 oz) / Slightly Negative
External Monitor Compatibility :
Yes
Optional View Finder Accessories:
45 ̊ viewfinder (32203)
Recommended Accessories:
TTL Flash Trigger for Canon (26321)

Technical Specifications:

Dimensions 357mm x 200mm x 161mm (W x H x D)
Depth Rating 100m
Weight in air 3.5kg
Weight in water negative 0.1kg (includes camera and battery)
Port Opening N120
$291.00
+
$657.00
+
$1,520.00
+
$1,257.00
+

No posts found

Write a review