Cart
UW Technics TTL-Converter for Sony APS-C Mirrorless NAUTICAM housings
Please sign in so that we can notify you about a reply
UW Technics TTL-Converter for Sony APS-C Mirrorless NAUTICAM housings (11073)
New generation Retra Pro strobe supports High Speed Synchronization (HSS). UW Tecnics's Sony TTL-Converter for Nauticam NA-6000, 6500 and 6600 housings combined circuitry allows for both optical and electrical (with optional bulkhead) flash triggering. Both optical and electrical TTL can be used seperately or simultaneously so that up to 4 strobes can be fired at the same time!
With easy installation, convert from manual to TTL strobe firing within minutes.
HSS Support
HSS shutter speeds are available for underwater flash usage in range 1/200 ....1/4000 with Sony A6000-A6600 cameras. This Retra HSS is a Manual type HSS- in HSS strobe mode Retra flash intensity can be adjusted by the strobe knob, manually only. HSS is not supported in TTL.
Easy In-Camera Control
UW Techinics TTL circuit is fully controllable via camera menu, and includes a special feature for M mode that adjusts flash intensity. Built-in firmware allows the photographer to use 3 variants of M mode, including both classic method and advanced methods. Advanced control allows the user to adjust underwater strobe light intensity manually via camera scale (approximately 1/64 to 1/1). In this case, the photographer does not need to operate the dial switches on the strobe body, and can just keep their hands on the housing, switch M mode and set the flash intensity via the camera controls.
TTL Accuracy
Strobe type can be easily set by onboard miniaturу 10-position rotary switch.
Compatible with:
- Retra Pro (including Retra HSS support)
- Inon Z-330 / Z-240 / D-2000 / S-2000
- Sea&Sea YS-D1 / YS-D2 (made-in-China) / YS-250
- Ikelite DS160 / DS160
- Subtronic Pro-270 / Pro-160
Long Battery Life
Battery life is 5 years in continuous working mode. Products have micro current consumption from a pair of CR2032 batteries and automatic On/Off switch. User need not be concerned about the battery life of the device during a dive trip.
Specifications of TTL Converter:
- Compatible photo cameras: Sony A6000 / A6500 / A6600
- Compatible underwater housing: Nauticam
- Compatible strobes: Retra Pro (including Retra HSS support)
- Inon Z 330, Z 240, S 2000;
Sea&Sea YS-250, YS-D1,YS-D2;
Ikelite DS161, DS160;
Subtronic Pro 270, Pro 160. - HSS Support (with Retra Pro strobes only): 1/200s....1/4000s
- TTL outputs onboard: 2 optical + 1 electric
- (+/- Ev) “Flash Exposure compensation” adjustment: yes
- “TTL / M” mode switching: yes
- Manual Adjustment of strobe intensity (by camera controls in “M” mode): approximately 1/64…..Full
- 1-st / 2-nd curtain mode: yes
- “Flash Off” mode: yes
- Continuous (serial) shooting mode: yes
- Switching power “On/Off”: automatic by camera command
- Battery: CR2032 (2 pcs.)
- Current consumption (in standby mode): 0.1 mkA
- Compatible Fiber-optic cable type: Nauticam #26216, #26217
- Compatible Electric cable: Sea&Sea, Ikelite
- Compatible Dual Electric cable: Sea&Sea, Ikelite
- Electric Bulkhead type (optional accessory): Nikonos-V, Ikelite, S-6
No posts found
