Nauticam NA-BMPCCII housing for Blackmagic Pocket Cinema Camera 4K

Nauticam NA-BMPCCII housing for Blackmagic Pocket Cinema Camera 4K (16501)

Blackmagic's Pocket Cinema Camera 4K delivers professional quality video with true DCI 4K at 60fps and 1080 HD at 120fps. Its hand-held design allows for portability without sacrificing any features. New, dual native ISO up to 25,600, allows underwater shooters to record with superior low light performance.

Going beyond just housing the Blackmagic Pocket Cinema Camera 4K, Nauticam's NA-BMPCCII housing has been designed to take full advantage of all the camera's features. It supports additional batteries, a portable SSD and external monitors or recorders. Supported by the N85 port system, the NA-BMCCII has an extensive line of lens and port configurations. For the all-in-on package, pair the Olympus M.Zuiko 14-42mm F3.5-5.6 II R lens with the WWL-1 on a bayonet mount system that can be exchanged underwater for the optional CMC-1 or CMC-2 to allow for the capturing of up to 130º wide-angle, macro and super-macro all on the same dive.

HDMI 2.0 Ready

The housing features several bulkheads including the large-bore M28 which supports the use of an HDMI 2.0 recorder such as the Atomos Ninja V through the Nauticam Atomos Ninja V Housing (PN 17922).

Custom Battery Pack and SSD Support

To allow for increased run-time, the NA-BMPCCII comes with a custom battery cage that holds 4 x 18650 Lithium Batteries (batteries not included).  This battery cage sits securely beneath the camera inside the housing and connects directly to the camera's power supply input.  With 4x3400 mAh batteries, the run-time of the system can exceed 3 hours.  Atop the camera's position inside the housing is a slot that holds a compact T5 SSD which connects to the camera via USB-C.

Vacuum Check and Leak Detection System

The Nauticam vacuum check and leak detection system is shipped with NA-BMPCCII as standard equipment. With the pre-installed vacuum valve, this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur.