Ikelite Underwater TTL Housing for Olympus OM-D E-M5 MK II Micro Four-Thirds Camera (6950.52)
The Ikelite Olympus E-M5 MKII housing is everything you love about an Ikelite DSLR Housing, shrunk down into a perfectly-sized package for travel. You can impress friends with your photo gear or your photos—the only housing with built-in TTL strobe exposure helps you do both!
The True TTL Advantage
Other housings simply waterproof your camera. An Ikelite TTL housing improves your photos. TTL or "Through-The-Lens" flash metering means the camera controls flash duration to properly expose an image. Our built-in proprietary circuitry tells your camera that a TTL external flash is attached, allowing the camera to adjust exposure more accurately than with slave fiber optic TTL strobes.
This camera does not have a built-in flash. In order to keep the housing as compact as possible, attachment of the camera's external flash is not supported in this installation. Non-Ikelite strobes may be attached with the appropriate electrical sync cord and operate non-TTL (manual exposure modes only) with this housing. Therefore it is not possible to trigger an external strobe via fiber optic cable.
Lens Port System
Our Mirrorless Interchangeable Lens Ports represent the most versatile, affordable, and astonishingly effortless system on the market today. Each port simply slides onto the front of the housing and secures with three thumbscrews, which provide positive reinforcement that the port is secure without any complex moving parts that can jam or break in a remote location.
Ports are available with either optical grade acrylic dome for wide angle zoom photography, or a glass flat front to focus on macro close-up. Unique interchangeable zoom sleeves are super lightweight and allow the camera to be slide into the housing with the lens attached for easy installation.
A compatible lens port is required for waterproof operation of this housing. Lens ports sold separately.Please go to Ikelite Mirrorless Lens Port Chart to figure out what port is right for your lens.
The camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing. A built-in magnifying viewfinder includes specially optics to provides a clear view of the camera's EVF when wearing a dive mask. This housing is also compatible with our Straight and 45° Magnified Viewfinders, sold separately, see below.
After you surface, use the camera's built-in WiFi function to transfer your photos for viewing on a compatible smartphone or tablet.
Controls are put right at your fingertips for all important camera functions. Control symbols laser engraved into the back of the housing will never peel off or fade even with years of use.
With a system of this caliber, a tray with handle is essential for the attachment of lighting and comfortable handling in a wide variety of shooting scenarios. This housing includes a balanced aluminum tray with our signature quick release handle for easy attachment and removal of strobes and video lights. This unique handle is curved slightly to fit the nature curvature of your hand, and features a soft rubber over-mold which makes it a delight to hold. The complete tray and handle detaches with the removal of two nuts for packing or to attach the optional Tray with Dual Handles.
Smaller than most other comparable mirrorless housings on the market, this system is as compact as possible to minimize bulkiness, strain, and drag in the water.
Special polycarbonate blends allow us to create an extremely strong yet clear and lightweight enclosure. We believe there's no substitute for inspecting the actual o-ring seal once your housing is closed. Our signature clear construction lets you see that the housing is watertight and dry before you enter the water, and provides full view of the camera while you're diving. Unlike aluminum, polycarbonate is fundamentally corrosion-resistant for easy maintenance year after year.
Like every Ikelite product, our housings are designed, built, and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. The average assembly technician is a certified scuba diver and has over 16 years of experience building Ikelite products. We back our products with over 50 years of experience and the most accessible and responsive customer service staff in the dive industry.
This housing requires the addition of a compatible lens port for waterproof operation. Lens port not included.
- DS50: yes, above serial number 70000
- DS51: yes
- DS125: yes, above serial number 5000
- DS160, DS161: yes
- DS200: yes, above serial number 7163
- Non-Ikelite: yes, manual flash exposure only
- Tray with quick release handle
- Waterproof bulkhead cap
- Silicone lubricant 1cc tube
- 1 year manufacturer warranty
Does the housing have access to all camera controls?
- Controls are not provided for rear touch screen, Fn1 button, Mode dial lock, Diopter adjustment dial, or External flash connector
No posts found