Ikelite Sony a6300 Underwater Housing

Click image to enlarge

6910.63
$974.95

Non-stocking item, ships in 5-6 days.
For faster shipping, please contact us.

+

Ikelite Underwater Housing for Sony Alpha a6300 Mirrorless Camera

Ikelite Underwater Housing for Sony Alpha a6300 Mirrorless Camera (6910.63)

A compact, full-featured waterproof housing for scuba diving, surf, pool, and creative photo opportunities anywhere there's water. This housing requires the addition of a compatible lens port for waterproof operation. Lens port not included.

Durability and corrosion free performance

Ikelite's brand new ABS-PC blend provides strength and corrosion free performance year with minimal maintenance. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light gray color provides superior contrast for enhanced view of the camera, LCD screen, and o-ring seal.

The unique rear seal design prevents accidental twisting or stretching of the o-ring for simple and confident assembly. We have eliminated the need for an o-ring groove or channel which can trap sand, dirt, or debris. Two double-passivated stainless steel locking lid snaps are simple to use and virtually unbreakable. The clear back allows you to see the o-ring form a solid, watertight seal as it closes.

Superb handling

The a6300 feels great in your hand with a simple and ergonomic control set. We extend this underwater, providing larger controls and push buttons which are easy to access even with thick gloves. Control symbols laser engraved into the back of the housing will never peel off or fade even with years of use. The camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing.

The front-loading camera mounting system makes installation and removal a breeze. The camera mounting plate allows ready access to the battery and memory card.

True TTL exposure

An integrated TTL circuit is fine-tuned to the Sony Alpha a6300 flash exposure protocol for the most accurate exposure possible. The circuit is powered by the strobe for zero maintenance and no batteries to change. Exposure compensation in TTL mode is supported using the camera's built-in control. At this time, only Ikelite DS strobes are capable of powering the circuitry. SEA&SEA, INON, and Nikonos strobes will still enjoy fast recycle times and improved battery life, but must be used in manual exposure modes only when used with electrical sync.

This housing provides a direct electrical connection to the camera's external flash hot shoe. The bulkhead connection has been moved to the top of the housing to keep cords out of your way and reduce strain on the cord ends.

The camera's built-in flash is suitable for firing an external strobe, but not for lighting a photo underwater. Two fiber optic ports are built into the front of the housing provide an attachment point for fiber optic cords from most major manufacturers. Optical D-TTL for Sea & Sea, or S-TTL for Inon is supported.

Two 1/4-20 threaded mounting points are included on the bottom of the housing for the attachment of a tray and handle system. Handles provide improved ergonomics underwater and are the foundation for your lighting mounts.
 

The Lens Support You Want

It couldn't be more simple to change ports than this system—just press the port on and tighten three thumb screws. Feel positive reinforcement that the port is secure with simple parts you can trust in a remote location.

This housing accepts a variety of ports to accommodate all of the most popular zoom, macro, and wide angle lenses. Our custom optical grade acrylic domes components provide the color, clarity, and durability of glass at a fraction of the travel weight and cost.

Housing Features

Dimensions :
  • 160 x 191 x 132 mm / 6.3 x 7.5 x 5.2 in
Weight- Land/Water :
  • 1.4 kg (49 oz) / Slightly Negative in Fresh Water
Construction Material :
  • ABS-PC, Acrylic, and Acetyl
Depth Rating :
  • 60 m / 196 ft
Access to All Camera Controls :
  • Access to all important functions
Includes Tray and/or Handles :
  • No
Includes Moisture Alarm System :
  • No
Includes Vacuum Seal System :
  • No
Interchangable Port System :
  • Yes
Compatible Port System :
  • DLM/A port mount
Sync Cord Compatibility :
  • Optical/electrical
TTL Converter Installed :
  • Yes
Cold Shoe Mount :
  • No
Bulkheads :
  • x1
External Monitor Compatibility :
  • No
Recommended Accessories :
  • Vacuum Kit for 1/2" Accessory Port (47012)

Specifications:

  • 200ft (60m) depth rating
  • Controls for all important camera functions
  • Ikelite flash bulkhead connector with built-in TTL circuitry
  • Slightly negative buoyancy in fresh water
  • Actual buoyancy varies depending on choice of lens and port
  • Weight 3.1 pounds (1430g) not including por
  • Dimensions 6.3x7.5x5.2 in (160x191x132 mm) including projections
  • ABS-PC, acrylic, and acetyl construction

What's Included:

  • Housing
  • Waterproof bulkhead cap
  • Lubricant
  • 1 year manufacturer warranty

No posts found

Write a review

Subscribe Now!

Enter your email address to receive special offers and promotions.