Ikelite Nikon D3400 & D3300 Underwater Housing

Click image to enlarge

6801.34
$1,599.95

Non-stocking item, ships in 5-6 days.
For faster shipping, please contact us.

+

Ikelite Nikon D3300 & D3400 Underwater Housing

(Lens Port not included.)

Ikelite Nikon D3400 & D3300 Underwater Housing 6801.34

New lighter weight ABS-PC and Lexan construction is fundamentally corrosion-resistant. Ikelite extends the ergonomics of your camera underwater, providing larger controls and push buttons which are easy to access even with thick gloves. Whenever possible, controls are located in the same configuration as on the camera to replicate the muscle memory and familiarity you've developed with your camera on the surface. Control symbols laser engraved into the back of the housing will never peel off or fade even with years of use. The camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing.

The front-loading camera mounting system makes installation and removal a breeze. The camera mounting plate allows ready access to the battery and memory card, and features a standard 1/4-20 mounting point for attachment to a tripod topside.

True TTL exposure

An integrated TTL circuit is fine-tuned to the Nikon flash exposure protocol for the most accurate exposure possible. The circuit is powered by the strobe for zero maintenance and no batteries to change. Exposure compensation in TTL mode is supported using the camera's built-in control. At this time, only Ikelite DS strobes are capable of powering the circuitry. SEA&SEA, INON, and Nikonos strobes will still enjoy fast recycle times and improved battery life, but must be used in manual exposure modes only.

This housing provides a direct electrical connection to the camera's external flash hot shoe. Cord attachment is as easy as screwing in a light bulb, and the threaded fit prevents accidental detachment during use. A variety of sync cord terminations are available for Ikelite, SEA&SEA, INON, or Nikonos strobes for ultimate versatility.

The camera's built-in flash cannot be used inside of the housing. External strobes must be capable of accepting an electrical sync cord connection.

Two 1/4-20 threaded mounting points are included on the bottom of the housing for the attachment of a tray and handle system. Handles provide improved ergonomics underwater and are the foundation for your lighting mounts.

The Lens Support You Want

It couldn't be faster to change ports than this system—just press the port on and snap the four locks closed. This housing accepts a variety of ports to accommodate all of the most popular zoom, macro, and wide angle lenses from Nikon, Sigma, Tokina, and more. Our custom optical grade acrylic domes provide the color, clarity, and durability of glass at a fraction of the travel weight.

Our new soft touch lobed zoom knob puts a unique system of universal zoom gears right at your fingertips. We provide two zoom sets with each housing, one for use with most popular larger diameter zoom lenses and a second designed for use with smaller diameter zoom lenses. Both sets are lightweight and easy to install with no modification to the lens required. A variety of dome and flat ports attach with four locking latches for maximum security and quick changes between dives.

This housing requires the addition of a compatible Lens Port for waterproof operation. Lens Port not included.
View Lens Port Chart

Great Handling

With a system of this caliber, a tray with handle is essential for the attachment of lighting and comfortable handling in a wide variety of shooting scenarios. This housing includes a balanced aluminum tray with our signature quick release handle for easy attachment and removal of strobes and video lights. This unique handle is curved slightly to fit the natural curvature of your hand, and features a soft over-mold which makes it a delight to hold. The complete tray and handle detaches quickly with the removal of two screws for travel. A new modular tray provides a 1/4-20 tripod mount and allows for the attachment of a second right-hand handle to the existing tray.

See the O-Ring Seal

An o-ring works best when it's true to its original form. Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. For added reassurance, there's no substitute for inspecting the actual o-ring seal through the back of your housing once it is closed. Polycarbonate is fundamentally corrosion-resistant for easy maintenance year after year.

Housing Features

Dimensions :
  • 229 x 180 x 160 mm / 9 x 7.1 x 6.3 in
Weight- Land/Water :
  • 2.3 kg (81 oz) / Near Neutral in Fresh Water
Construction Material :
  • ABS-PC, Acrylic, and Acetyl
Depth Rating :
  • 60 m / 196 ft
Access to All Camera Controls :
  • Controls are not provided for Diopter Adjustment Control, Info Button, Self-Timer, or Flash Mode/Compensation Button
Includes Tray and/or Handles :
  • Yes
Includes Moisture Alarm System :
  • No
Includes Vacuum Seal System :
  • No
Interchangable Port System :
  • Yes
Compatible Port System :
  • DL
Sync Cord Compatibility :
  • Optical
TTL Converter Installed :
  • Yes
Cold Shoe Mount :
  • No
Bulkheads :
  • x1
External Monitor Compatibility :
  • No
Reccomended Accessories :
  • Vacuum Kit for 1/2" Accessory Port (47012)

    200 ft (60m) depth rating
    All important camera functions are accessible
    Controls are not provided for Diopter Adjustment Control, Info Button, Self-Timer,
     or Flash Mode/Compensation Button
    Ikelite bulkhead connector with integrated TTL circuitry
    Near neutral buoyancy in fresh water
    Actual buoyancy varies depending on choice of lens and port
    Weight 5.1 lb (2.3 kg) not including tray + handles
    Dimensions 9 x 7.1 x 6.3 inches (229 x 180 x 160 mm) including projections

No posts found

Write a review

Subscribe Now!

Enter your email address to receive special offers and promotions.