Ikelite Canon 200D Rebel SL2 Housing & Camera Package
This is the smallest Ikelite DSLR complete package available! The Ikelite Underwater Housing & Camera Package for Canon 200D Rebel SL2 works with the powerful Canon 200D SL2 DSLR, uses all the great cropped sensor lenses and yet can be held with one hand! All the great Ikelite features are available; TTL-auto operation with their lenses, rugged thick poly carbonate construction with all-metal, serviceable controls. This is a great macro camera setup, as you can shoot the Canon 60mm macro lens and still have a small one handled system to get into tight spots!
The 200D SL2 system is a great choice whether you're upgrading from an older camera, or downsizing from a larger system. We think this camera is the best combination of size, speed, image quality, and value. The SL2 is as small and light as a mirrorless camera, yet focuses as fast as a DSLR. It accepts all of the best Canon EF mount lenses without the need for an adapter. A 24 megapixel CMOS sensor and DIGIC 7 processor mean that you'll have prints worth hanging on the wall... or covering it!
True TTL Exposure
TTL or "Through-The-Lens" flash metering means the camera controls flash duration to properly expose an image. Unlike fiber optic systems, which attempt to copy the behavior of the camera's built-in flash, this unique housing for the Canon EOS 100D Rebel SL1 provides direct, electrical transmission of this TTL signal to the strobe.
Since the camera is talking directly to the strobe, the camera's built-in flash does not need to fire. This dramatically increases battery life and virtually eliminates the recycle lag, allowing the camera to be triggered in more rapid succession.
It's a small package, only slightly larger than the EOS 200D camera and just as comfortable to hold. Set up is a snap with simple, fully front-loaded camera installation. The camera mounting shoe is designed to be unobtrusive and allow changing of battery and memory cards or attachment to a surface tripod without being removed from the camera. A smooth-action, sensitive shutter trigger is right at your fingertips whether holding the side of the housing or the optional dual tray with quick release handles. Controls are provided for all camera functions. For a system of this caliber, a tray with handle is essential to good handling, balance underwater, and attachment of external lighting. The complete handle assembly removes with just two nuts for traveling.
This housing comes standard with an optical grade acrylic dome port with zoom ring. This port provides sharp images and zoom capabilities with both the Canon EF-S 18-55mm STM kit lens, plus the popular Tokina 10-17mm lens. Minimal vignetting (dark shadows in the corners of the image) will be present in the 10-12mm range when used the Tokina lens. A special zoom gear system allows the camera with lens attached to be installed from the back of the housing, without requiring removal of the dome port.
The dome port may be removed without tools to attach the optional Flat Port for the Canon EF-S 60mm Macro lens. Simply loosen the securing thumb screws and slide the port off. The optional Flat Port allows use of the 60mm Macro lens in auto-focus mode and features 67mm front threads for the optional attachment of macro converter wet lenses.
Special polycarbonate blends allow us to create an extremely strong yet clear and lightweight enclosure. We believe there's no substitute for inspecting the actual O-ring seal once your housing is closed. Our signature clear construction lets you see that the housing is watertight and dry before you enter the water, and provides full view of the camera while you're diving. Polycarbonate is fundamentally corrosion-resistant for easy maintenance year after year.
- Underwater Housing # 6970.05
- Canon EOS Rebel SL2 camera body
- Canon EF-S 18-55mm f/4-5.6 IS STM lens
- Canon battery with charger
- Camera strap
- USB interface cable
- 200 ft (60m) depth rating
- DLM Type C port mount
- Controls for all important camera functions; controls are not provided for Diopter Adjustment Knob, Display Button, Wi-Fi Button, Depth-of-field Preview Button, and Flash Button
- Ikelite flash bulkhead connector with built-in TTL circuitry
- Two 1/4-20 threaded tray mounts with 3-inch (76mm) spacing
- Slightly negative buoyancy in fresh water
- Actual buoyancy varies depending on choice of lens and port
- Weight 3 pounds (1.4 kg) not including port
- Dimensions 7.5 x 5.9 x 6 in (191 x 150 x 152 mm) including projections
- ABS-PC, acrylic, and acetyl construction
No posts found