DiveAlertPLUS is a specially designed, small, light weight pneumatic signaling device that uses quick-connect/disconnect hose couplings to become an integrated part of your power inflator. Installation is easy and takes only a moment.
DiveAlertPLUS uses a small amount of air from your SCUBA tank to make a piercingly loud sound in air or water. People have been able to hear a DiveAlertPLUS one mile away from diver in need above water. In conditions where visibility is limited, a DiveAlertPLUS can a life saver. Underwater you can sound for attention quickly with the press of a button.
DiveAlertPLUS does not require any modification to your equipment, and it does not interfere with the normal operation of your equipment. The DiveAlertPLUS comes in three different models to accommodate different connectors: DV1, DV2, and DV3.
DV1 fits most standard inflator hoses.
DV2 compatible with SeaQuest AirSource (including AirSource3 QD), Mares Air Control, Oceanic Air XS and Aeris AirLink alternate inflation regulator systems.
DV3 compatible with ScubaPro A.I.R. 2, Tusa Duo-Air, Atomic SS1, Zeagle OctoZ (new) and Sherwood’s Gemini alternate inflation regulator systems.
Once the tank is turned on and the DiveAlertPLUS connected, squeeze the DiveAlertPLUS softly underwater for a subsurface signal. Or squeeze it firmly on the surface for a loud surface signal blast. Check that DiveAlertPLUS is installed correctly and functioning properly before every dive. Also be careful not to point DiveAlertPLUS toward yourself or toward anyone who is in close proximity to you when you activate the surface signal (it’s really loud!).
The DiveAlertPLUS uses chrome-plated brass couplings to attach to your power inflator. The activator button engages a chrome-plated brass actuator valve stem causing a small amount of air to flutter a stainless steel diaphragm, emitting a piercingly loud sound from the injection-molded thermoplastic body. The subsurface / underwater signal is produced by a percussion "buzzing" noise made by a piston hitting a stainless steel diaphragm much like a drum.
After each use, DiveAlertPLUS should be rinsed with fresh water. This is especially important after use in chlorinated swimming pools and in other water having corrosive substances. Additionally, it is highly recommended that you blow the water out of DiveAlertPLUS before storing. This can be done by pressurizing and activating both the surface and subsurface signaling elements. We recommend that you cup your hand over the surface signaling element to muffle the loud noise.
65 inches long x 8 inches wide
Approximately 40 lbs. of lift.
Nylon strap handle on top allows for easy attachment of light or slate.
400 Denier poly-urethane coated nylon material.
No posts found