Cart is empty
Please Note: Memorial Day Holiday Closure
The retail store will be closed Saturday May 25th through Monday, May 27th for the Memorial Day US Holiday. Shipping will resume on Tuesday, May 28th.
Optical Ocean I-DAS Tray & Sea & Sea YS-D1 Strobe Lighting Package
The Sea & Sea YS-D1 is setting new standards for power in a compact strobe. This lighting package is complete and can accomidate almost any housing from point and shoots to micro 4/3rds.
The YS-D1 is the most versatile underwater strobe available today. The DS-TTL exposure compensation function enables subtle lighting control by adjusting the Light Level dial in DS-TTL mode. Powered by four AA batteries, the YS-D1 offers a maximum light output of Guide Number 32.
Two accessory diffusers (included)
In macro photography when a wide beam is not necessary, no diffuser should be attached. For an even strong circular 100x100 light output is desired, mount the Diffuser 100. When a wide-angle lens is used, the diffuser 120 should be attached. Three beam angles can be selected in accordance with the photographer’s requirements.
EV Compensation Control Function
The YS-D1 is the world’s first slave TTL strobe equipped with an exposure compensation (EV) control function
By controlling the actual flash light level, the strobe realizes accurate exposure compensation with EV value.
Fantasea NanoFocus Light
A small Nanofocuys focsing light will help light your subject so that both you and your camera can catch the framing and focus. Options are available for more powerful lights.
I-DAS TRL Flat Tray and Arms
includes handles and arms for strobes. Compact and sturdy, made from black anodized aluminum. Handles adjust in width for large or small hands, housings, gloves, etc. Will accommodate most point and shoot housings from major manufacturers such as 10Bar, Nauticam, Canon, Olympus, Fuji, Panasonic, Fantasea and many others. The TRL Flat Tray is the only tray we recommend for Ikelite UltraCompact and 10Bar housings, please select extra mounting hardware option.
• Sea & Sea YS-D1 Strobe with diffusers
• Fantasea NanoFocus Light (upgrades available)
• 10Bar SSHL-SSHL sync cord (other housing mounts can be specified)
• TRL, I-DAS Flat Tray
• HD-GN Pistol Grip, 2x I-DAS Pistol Grip Handles
• BM-i05”, 3” Strobe Arm
• BM-i05”, 5” Strobe Arm
• BB-i07”, 7” Strobe Arm
• I-DAS CL140 Clamps (3x) With 140 Degrees of movement.
Upgrades and substitutions available! Ask for pricing.
- [Guide Number (ISO 100/m) (land)] : 32, 24 (with Diffuser 100 attached), 20 (with Diffuser 120 attached)
- [Beam Angle] : 80°x80° (without diffuser), 100°x100°(diffuser 100), 120° x 120° (diffuser 120)
- [Batteries] : 4xAA A: 6V Ni-MH: 4.8V
- [Number of Flashes*1] : A: 150 Ni-MH: 250
- [Recycle time (full)*2] : A: 2.8 sec. Ni-MH: 1.9 sec.
- [Color temperature] : 5600K
- [Color temperature w/diffuser] : 5250K
- [Depth rating] : 100m / 330ft
- [Dimensions (WxHxD)] （Excluding protruding part(s) and the arm holder.）: 87x135x111mm / 3.5 x 5.4 x 4.4 inches
- [Weight] : 650g / 22.8oz (w/o batteries)
- [Underwater weight] : 5g / 0.4oz(w/ batteries)
- Exposure control: DS-TTL II, Slave TTL, Light level control dial (GN): 1 / 1.4 / 2 / 2.8 /4 / 5.6 /8 / 11 / 16 / 22 / 32 (11 steps)
- Pre-flash control: Equipped with pre-flash cancel mode
- DS-TTL II function
- Slave function
- Auto power OFF function
- Sync cord: 5-pin Sync cord/N, Fiber-Optic Cable (L-type)
- Over-pressure relief valve
- LED target light
*1 Number of flashes and recycle time depends on the battery brand, temperature and frequency of use.
*2 Number of flashes and recycle time of Ni-MH batteries were tested on 2400 mAh batteries.
01 LED target light
03 Fiber-optic cable socket (for additional strobe)
04 Fiber-optic cable socket (slave sensor)
01 Battery cap
02 Target light switch
03 Mode switch
04 Ready lamp (red) / TTL confirmation lamp (green) / Slave TTL mode lamp (blue)
||Light level control dial|
No posts found