4301 Nikon iTTL Adapter - Ike Connectors

Let the camera adjust your Ikelite Substrobes while you focus on composition and enjoy the confidence of perfect exposure.

Every TTL adapter is equipped with a simple rotating switch that allows effortless toggling between TTL and manual exposure. When in TTL mode, exposure compensation may be accessed via the camera's built-in menus.
Single or dual Substrobes may be connected to the adapter using an appropriate #4103.51 (single) or #4103.52 (dual) sync cord. Use of dual Substrobes requires a #4103.52 dual sync cord. Two Substrobes cannot be controlled by individual adapters even if the housing is equipped with two bulkhead connectors.

Please note that strobe requirements may differ by adapter and camera models. TTL adapters are NOT intended for use with non-Ikelite and/or non-digital underwater strobes.

Housing Compatibility
Ikelite TTL adapters are compatible with many brands of underwater camera housings that feature an external strobe connector. The housing must have either an Ikelite (ICS) style or standard Nikonos V style bulkhead connection. A 5-conductor TTL hotshoe for attachment to the camera is also required.

Please refer to printed specifications or contact the product manufacturer or representative for specific information regarding the wiring of your housing. We cannot confirm proper wiring or operation of a non-Ikelite product.
TTL adapters are NOT intended for use with Ikelite brand underwater camera housings.