Sea & Sea MDX-D300s Housing for Nikon D300s DSLR - Optical Ocean Sales Underwater Photo

Sea & Sea MDX-D300s Housing

Location: Home/Sea & Sea DSLR Housings & Accessories/Sea & Sea MDX-D300s Housing

Further Information

Product Information
Specifications

Two Fiber-optic cable sockets

Simply by connecting the Fiber-Optic Cable (L-type) to the connector, the light of the digital camera’s built-in flash is detected and connected to an external strobe. This is considerably less complicated than setting up an electrical connector that requires detailed knowledge. It also eliminates any risks involved when the connector is submerged in water.

Realizes comfortable manual operation

Fully strove for a unique structure where the main command dial and subcommand dial can be reached easily. As a result, achieved a structure in which the subcommand dial was moved even closer to the grip than in previous models by adjustment of the chassis inside the housing. Can adjust the shutter/aperture in a snap while holding the grip. With just the right amount of clearance that can

TTL auto adjustment available when using an optional YS Converter/N

When using a YS Converter/N to enable the TTL auto adjustment, use a 5-pin Sync Cord/N to connect it to a genuine SEA&SEA strobe.

Controls almost all of the Nikon D300s essential functions underwater.
Every detail of the housing is precision machined from a solid aluminum block to achieve a high-quality texture and design. All edges have been polished carefully for safety.
The housing is protected by a highly corrosion resistant, anodized coating. The coating protects the housing from environmental corrosion and abrasions.
Features a slanted (sideways) button on the back with an original structure. For balancing even more active functionality and styling in high dimension.
Furnished with a tripod socket in the central region of the bottom surface of the main body. If you remove the attached Ergo Grip, you can also add an optional Grip-Stay L.
Comes standard with two bulkhead connectors: one type-N connector (2-pin wired for manual) and one 5-pin wired connector (for dedicated TTL).
Equipped with a Optical Viewfinder 0.5x standard. Interchangeable 0.66x/0.8x viewfinders (optional) are also available.
The quick shoe makes the camera easy to install and remove from the housing.
A built-in leak sensor immediately alerts you to any water leakage.
Strong and durable build, with a depth rating of up to 60m / 200ft.

*The converter requires the 5-pin Sync Cord/N for connecting to a strobe.
*The MDX-D300s housing comes from the factory with these type-N connectors: one 2-pin wired connector and one 5-pin wired connector.
*To use two SEA&SEA YS-Series strobes with the factory-equipped type-N connectors, you must use the 5-pin Dual Sync Cord/N.

[Construction] Body: corrosion-resistant aluminum alloy (machined)
Grip: corrosion-resistant die-cast aluminum alloy
[Depth rating] 60m / 200ft
[Dimensions (WxHxD)] 339x185x122.6mm / 13.6x7.4x4.9inch
[Weight] Approx. 2,500g / 87.5oz (Housing only)

Details 1

01 Accessory shoe
02 Exposure mode / Format button
03 Exposure compensation button
04 Power switch
05 Shutter lever
06 Sub-command dial

07 Fiber-optic cable socket (x2)
08 YS converter connector
09 Strobe connector
10 Focus / Zoom dial
11 Focus-mode selector dial

Details 2

01 ISO sensitivity button
02 Image quality button
03 Release mode dial lock release button
04 White balance button
05 Release mode dial
06 Playback button
07 Playback button
08 Menu button
09 Protect / Help button
10 Thumbnail / Playback zoom out button
11 Playback zoom in button
12 OK button

13 Metering selector
14 AE lock / AF lock / AF-ON lever
15 Main command dial
16 Center button
17 Live View button
18 Multi selector
19 Info button
20 AF-area mode selector
21 Viewfinder