All camera controls (except the in-camera manual) button are fully functional through the housing and depth rated to 200ft (60m). Easy open latch and drop in camera loading make set-up a breeze. Two 12-24 threaded mounts on the bottom of the housing allow for the secure attachment of optional trays and lighting accessories.

Includes one 1cc tube of silicone lubricant, vinyl lanyard, flash diffuser, flash deflector and vinyl port cover

Camera's Built-in Flash.
An included flash diffuser improves lighting quality when the camera's built-in flash is used. A built-in flash is effective between 1-3 feet (0.3-0.9m) from the subject in clear conditions. For best results an external underwater strobe is recommended.

External Accessory Lenses
An external wide angle conversion lens increases angle of coverage so you can get much closer to your subject while still fitting everything in the frame. By reducing the amount of water between the subject and your camera lens, the resulting image will be more crisp and colorful. Attach 67mm threaded #6420 Ikelite W-20, Inon Type II and Epoque lenses using the #9306.78 port adapter. This adapter may also be used to attach 67mm threaded macro lenses.

Minimal vignetting (shading in the corners) will be present in the widest setting when using an external accessory lens. This can be eliminated by zooming in slightly.

Size and Weight. - 6.4" wide x 4.6" high x 3.3" deep ( including controls and lens port ). 16cm x 12cm x 8.4cm.
Less than 1lb (0.45kg) above water.
Neutrally buoyant underwater.