Gates nanoFlash Mount   
Integrate the nanoFlash Recorder in your Gates Housing
The nanoFlash Mount secures the Convergent Design nanoFlash recorder conveniently inside Gates EX1 / EX1R housings.

The nanoFlash recorder allows very high data rate recording – greater than 100Mbps – with your EX1 / EX1R cameras. Combined with a Gates housing and SWP44C Super Wide Port, it represents the smallest underwater video system capable of meeting the highest standards for broadcast HD acquisition.

The nanoFlash Mount is complete with Gates legendary customer support. The pros know there is no need to take a chance… they take a Gates! (Camera, batteries and nanoFlash recorder not included.)

Reliability, durability, dependability - the Gates hallmark for over 40 years.

Key Features

Close integration
The nanoFlash recorder closely integrates inside the Gates EX1 and EX1R video housings.

HF Acquisition Broadcast HD acquisition
Broadcast HD acquisition standards are achieved with the Gates EX1 / EX1R housings, nanoFlash recorder and SWP44C port.

Standard Components
nanoFlash Mount Bracket
SDI Cable
Hardware

Optional Components
SWIT battery S-8U62 battery adapter cable

Dimensions
N/A. Integrates closely with the Gates EX1/EX1R housing / camera systems

Weight
<1lb / 0.45kg

Warranty
2 Years

Special Considerations

Status Display
When using then nanoFlash, status information is available only via the rear housing viewfinder. Status display from the camera must be 'OFF' for SDI and component video feeds.

Power Options
Power to the nanoFlash recorder can be either:

    Li-Ion battery (from Convergent Design)
    SWIT S-8U62 battery, which can power both the camera and nanoFlash